Seam

fortyfiver New Member Posts: 17	Seam Jul 28, 2020 11:57:34 GMT via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by fortyfiver on Jul 28, 2020 11:57:34 GMT Hi all I’m just fitting a 3/4 rear wing and I’ve got the step to the sill ok but my question is should that seam be left clear or have seam sealer in between? Thanks Alan

vader Junior Member Posts: 55	Seam Jul 28, 2020 21:02:24 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by vader on Jul 28, 2020 21:02:24 GMT Mine is actually filled but I’m told originally it was just a joint (not the smoking kind) people fill it with rust proofing.
	Cast out from SOC, you are reborn. Rise Lord Vader

newtothis Junior Member now gone to the dark side Posts: 53	Seam Jul 29, 2020 22:20:30 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by newtothis on Jul 29, 2020 22:20:30 GMT A lot of people use Epoxy seam sealer now days , me i would get a few weld tacks in and then use the epoxy ,